Dataset of the aqueous solution and petrochemical wastewater treatment containing ammonia using low cost and...

In this dataset, the removal of ammonia from synthetic and real wastewater was studied using the Ziziphus spina-christi activated carbon (ZSAC) and the biochar of Sargassum oligocystum (BSO). Several analyses such as FTIR, SEM, EDS, XRD, and BET were used to determine the physical and surface properties of the adsorbents. The BET analysis showed a high specific surface area of 112.5 and 45.8 m²/g for ZSAC and BSO, respectively. Also, the results indicated that the highest adsorption of ammonia from synthetic wastewater using ZSAC and BSO were obtained 97.9% and 96.2%, at contact time of 80 min, 25 °C, pH 8, and adsorbent dosage of 5 g/L. In addition, the adsorption results of real wastewater from Asaluyeh Pardis Petrochemical Company demonstrated that both adsorbents had the removal efficiency of approximately 90%, which indicates high adsorption efficiency using two adsorbents. Moreover, equilibrium studies showed that the adsorption process of ammonia from wastewater using both adsorbents follows the Freundlich model and the maximum adsorption capacity using the Langmuir isotherm were calculated to be 25.77 mg/g and 7.46 mg/g for ZSAC and BSO, respectively. Furthermore, the thermodynamic study showed that the adsorption process using the bio-adsorbents was spontaneous and exothermic.