Related Experiment Video
Updated: Jan 19, 2026

Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Published on: February 28, 2016
Phosphosilicate fiber-based dual-wavelength random fiber laser with flexible power proportion and high spectral
Abstract:
Phosphosilicate fiber has the inherent advantage of generating dual-wavelength output owing to the two Raman gain peaks at the frequency shifts of ∼13.2 THz (silica-related) and 39.9 THz (phosphorus-related), respectively. The frequency shift of 39.9 THz is often adopted to obtain long wavelength laser, while the control of Stokes light at 13.2 THz has attracted much attention currently. In this paper, a dual-wavelength random distributed feedback Raman fiber laser (RDFL) with over 100 nm wavelength interval and continuously tunable power proportion was presented based on phosphosilicate fiber for the first time. Through using the filtered amplified spontaneous emission (ASE) source as the pump source, the spectral purity of the Stokes light could be as high as 99.8%. By tuning two manual variable optical attenuators (VOAs), the power proportion of the silica-related Stokes light could range from ∼0% to 99.0%, and the maximum value is limited by the generation of second order Stokes light. Although the power handling capability of the VOA is merely 2 W, over 23 W total output power of the Stokes light was obtained thanks to the particular power distribution property of RDFL. This experiment demonstrates the potential to achieve a flexible high-power and high-spectral purity dual-wavelength RDFL output.
Related Concept Videos
14:18Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Synergistic Photobiomodulation with a Dual-Wavelength Laser in an In Vitro Disease Model
08:23A Random-displacement Measurement by Combining a Magnetic Scale and Two Fiber Bragg Gratings
Classification of Skeletal Muscle Fibers
Slow-Twitch Muscle Fibers
Slow oxidative, muscle fibers appear red due to large numbers of capillaries and high levels of...
08:48Writing Bragg Gratings in Multicore Fibers
08:28Microfluidic Dry-spinning and Characterization of Regenerated Silk Fibroin Fibers
