Related Experiment Video
Updated: Jan 19, 2026
Heterogeneous Catalytic Reactor and Hydrogenation of Ethylene
Published on: April 30, 2023
Complete dehalogenation of bromochloroacetic acid by liquid phase catalytic hydrogenation over Pd/CeO2 catalysts
Changlong Zheng1, Minghui Li1, Hui Liu1
1State Key Laboratory of Pollution Control and Resource Reuse, Jiangsu Key Laboratory of Vehicle Emissions Control, School of the Environment, Nanjing University, Nanjing, 210023, China.
Abstract:
Bromochloroacetic acid is classified as one of the typical disinfection byproducts (DBPs). In this work, supported palladium catalysts on different supports (CeO2, Al2O3, SiO2 and activated carbon (AC)) (labelled as Pd/support) were synthesized via the deposition-precipitation method (D-P method) and their activities for the complete dehalogenation of bromochloroacetic acid by liquid phase catalytic hydrogenation were evaluated. Comprehensive characterizations of the catalysts were conducted by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), point of zero charge (PZC), X-ray photoelectron spectroscopy (XPS) and CO chemisorption. Results indicated that the PZCs of the supports varied with each other. The stronger Pd-support interaction and higher Pd dispersion of Pd/CeO2 and Pd/Al2O3 than those of Pd/AC and Pd/SiO2 were confirmed by X-ray photoelectron spectroscopy and CO chemisorption. Pd/CeO2 had a higher ratio of positively charged Pd to metallic Pd (Pdn+/Pd0) than Pd/Al2O3 and Pd/AC due to a stronger metal-support interaction. Accordingly, a negligible bromochloroacetic acid conversion was observed on Pd/SiO2, whereas bromochloroacetic acid was found to be readily decomposed on Pd/CeO2, Pd/Al2O3 and Pd/AC. However, the dechlorination reaction could not further proceed on Pd/Al2O3 and Pd/AC catalysts after the bromine functionality was removed from bromochloroacetic acid. A complete dehalogenation of bromochloroacetic acid occurred only on Pd/CeO2. Furthermore, the dechlorination rate constants of monochloroacetic acid and bromochloroacetic acid over Pd(1.40)/CeO2 were 0.018 and 0.031 min-1 respectively, confirming an induced synergistic effect due to the existence of bromine atoms. It was worth noting that a stepwise-concerted pathway was verified during the liquid phase catalytic hydrodehalogenation of bromochloroacetic acid.
Related Concept Videos
08:56Catalytic Reactor: Hydrogenation of Ethylene
The hydrogenation of ethylene (C2H4) to ethane (C2H6) has often been studied as a model reduction reaction in characterizing new metal catalysts.1-2 While supported nickel is not the most active metal catalyst for this reaction, it is active enough that reaction can take place at < 200°C.
The reaction typically involves adsorbed, dissociated hydrogen (H2)...
08:15Temperature-programmed Deoxygenation of Acetic Acid on Molybdenum Carbide Catalysts
09:21Tuning the Acidity of Pt/ CNTs Catalysts for Hydrodeoxygenation of Diphenyl Ether
12:08Catalytic Reactions at Amine-Stabilized and Ligand-Free Platinum Nanoparticles Supported on Titania During Hydrogenation of Alkenes and Aldehydes
11:00Liquid Phase Reactor: Sucrose Inversion
Both batch and continuous flow reactors are used in catalytic reactions. Packed beds, which use solid catalysts and a continuous flow, are the most common configuration. In the absence of an extensive recycle stream, such packed bed reactors are typically modeled as "plug flow". The other most common continuous reactor is a stirred tank, which is assumed to be...
08:40Synthesis of Metal Nanoparticles Supported on Carbon Nanotube with Doped Co and N Atoms and its Catalytic Applications in Hydrogen Production