Related Experiment Video
Updated: Jan 19, 2026

Grafting Multiwalled Carbon Nanotubes with Polystyrene to Enable Self-Assembly and Anisotropic Patchiness
Published on: April 1, 2018
Carboxylated Multiwalled Carbon Nanotubes as Dispersive Solid-Phase Extraction Sorbent to Determine Eighteen
Tengfei Liu1, Daifeng Yang1, Jian Mao1
1Jiangsu Taihu Area Institute of Agricultural Sciences, Suzhou 215155, China.
Abstract:
A simple, rapid, and reliable method based on dispersive solid-phase extraction (d-SPE) and gas chromatography-mass spectrometry (GC-MS) was developed for quantitating polychlorinated biphenyls (PCBs) in vegetable samples. Parameters affecting both the extraction yields and cleanup efficiency, including the type and volume of extraction solvent, extraction time, type and volume of cleanup sorbent, and cleanup time, were optimized. Matrix effects were evaluated, and matrix-matched calibration was recommended. Under the optimized conditions, carboxylated multiwalled carbon nanotubes (MWCNTs-COOH), which exhibit excellent adsorption capabilities due to large surface area and unique structure, were employed as d-SPE sorbent to remove interfering substances, rather than the analytes, from vegetable samples. Satisfactory linear relationship was observed for all PCBs across a concentration range of 5-500 μg/kg with correlation coefficients no less than 0.9993. Four representative vegetables (cucumber, tomato, lettuce, and cabbage) were selected as matrices for method validation. Each matrix was spiked at concentrations of 5, 10, and 100 μg/kg to evaluate recoveries, which ranged from 84.5% to 116.5% with relative standard deviations (n=6) between 0.6% and 17.6%. The limits of detection and the limits of quantification ranged from 0.3 to 1.4 μg/kg and 0.8 to 4.5 μg/kg, respectively. Twelve real vegetable samples were analyzed using the proposed method. Three of the target PCBs were detected in one lettuce sample with the total concentration of 17.9 μg/kg.
Related Concept Videos
11:09Grafting Multiwalled Carbon Nanotubes with Polystyrene to Enable Self-Assembly and Anisotropic Patchiness
Solid-Liquid Extraction
Extraction is a crucial step in most chemical analyses. It entails removing the analyte from its sample matrix and passing it into the phase required for spectroscopic or chromatographic identification and quantification. When the sample is a solid and the required phase for analysis is a liquid, the process is called solid-liquid extraction. A simple and broadly applicable form of solid-liquid extraction entails combining...
05:31Gas Chromatography-Mass Spectrometry Paired with Total Vaporization Solid-Phase Microextraction as a Forensic Tool
08:14Extraction of Non-Protein Amino Acids from Cyanobacteria for Liquid Chromatography-Tandem Mass Spectrometry Analysis
11:00Determination of the Gas-phase Acidities of Oligopeptides
05:29Profiling Volatile Compounds in Blackcurrant Fruit using Headspace Solid-Phase Microextraction Coupled to Gas Chromatography-Mass Spectrometry
