Enhanced Dielectric Performance of P(VDF-HFP) Composites with Satellite-Core-Structured Fe₂O₃@BaTiO₃ Nanofillers

Polymer dielectric materials are extensively used in electronic devices. To enhance the dielectric constant, ceramic fillers with high dielectric constant have been widely introduced into polymer matrices. However, to obtain high permittivity, a large added amount (>50 vol%) is usually needed. With the aim of improving dielectric properties with low filler content, satellite-core-structured Fe₂O₃@BaTiO₃ (Fe₂O₃@BT) nanoparticles were fabricated as fillers for a poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) matrix. The interfacial polarization effect is increased by Fe₂O₃ nanoparticles, and thus, composite permittivity is enhanced. Besides, the satellite-core structure prevents Fe₂O₃ particles from directly contacting each other, so that the dielectric loss remains relatively low. Typically, with 20 vol% Fe₂O₃@BT nanoparticle fillers, the permittivity of the composite is 31.7 (1 kHz), nearly 1.8 and 3.0 times that of 20 vol% BT composites and pure polymers, respectively. Nanocomposites also achieve high breakdown strength (>150 KV/mm) and low loss tangent (~0.05). Moreover, the composites exhibited excellent flexibility and maintained good dielectric properties after bending. These results demonstrate that composite films possess broad application prospects in flexible electronics.