Capric Acid Hybridizing Fly Ash and Carbon Nanotubes as a Novel Shape-Stabilized Phase Change Material for Thermal
Peng Liu1,2, Xiaobin Gu3, Zhikai Zhang2
1Key Laboratory of Solid Waste Treatment and Resource Recycle, Ministry of Education, South West University of Science and Technology, Mianyang 621010, Sichuan, China.
Abstract:
Capric acid (CA) is one of the most promising phase change materials to be used in reducing the energy consumption of buildings due to its suitable phase change temperature and high latent heat. In this paper, a novel shape-stabilized phase change material (SSPCM) is fabricated by "hazardous waste" fly ash (FA) via simple impregnation method along with CA and carbon nanotubes (CNTs). In this composite, raw FA without any modification serves as the carrier matrix to improve structural strength and overcome the drawback of the leakage of liquid CA. Simultaneously, CNTs act as an additive to increase the thermal conductivity of composites. The results of leakage tests indicate that CA was successfully confined as 20 wt % in the composite. Then, various characterization techniques were adopted to investigate the structure and properties of the prepared SSPCM of CA/FA/CNT. Scanning electron microscopy and Fourier transform infrared spectroscopy results showed that CA was well adsorbed into the microstructure of FA, and there was no chemical interaction between the components of the composites. Thermogravimetric analysis results demonstrated that the SSPCM presented good thermal stability. Differential scanning calorimetry results indicated that the melting temperature and freezing temperature of CA/FA/CNT were 31.08 and 27.88 °C, respectively, and the latent heats of CA/FA/CNT during the melting and freezing processes were 20.54 and 20.19 J g-1, respectively. Moreover, compared to the CA and CA/FA, the heat transfer efficiency of CA/FA/CNT was significantly improved by doping 1, 3, 5, and 7 wt % of CNT. All of the results suggest that CA/FA/CNT possessed comfortable melting and freezing temperatures, excellent thermal stability, high latent heat value, and favorable thermal conductivity, and therefore, it is a suitable thermal storage material for building applications. Simultaneously, CA/FA/CNT can improve the comprehensive utilization level of FA.
More Related Videos
09:35Preparation and Evaluation of Hybrid Composites of Chemical Fuel and Multi-walled Carbon Nanotubes in the Study of Thermopower Waves
Published on: April 10, 2015
09:23Author Spotlight: Advancing Energy Solutions Using Nanocomposites as Processed Thermoelectric Materials
Published on: May 17, 2024
Related Concept Videos
Energy Stored in a Capacitor: Problem Solving
Capacitor-discharge ignition is a type of ignition system commonly found in small engines where the energy released from a capacitor ignites an induction coil that, in turn, fires the spark plug.
To calculate the energy stored in a capacitor of...
Energy Stored in Capacitors
By integrating the equation that relates voltage and current in a capacitor, one can derive an equation for the voltage across the capacitor at any given time. This equation is crucial in understanding and predicting the behavior of capacitors in...
Energy Stored in a Capacitor
Phase Transitions: Sublimation and Deposition
