Electrodynamic Force Derived in-Channel Separation and Detection of Au Nanoparticles Using an Electrochemical AC
Mozammal Md Hossain1, N G Gurudatt1,2, Kyeong-Deok Seo1
1Department of Chemistry and Institute of BioPhysio-Sensor Technology , Pusan National University , Busan 46241 , South Korea.
Abstract:
In this study, we have established the separation of Au nanoparticles (AuNPs) using a symmetrical AC electric field applied-electrochemical microfluidic device composed of carbon channel and detection electrodes. The lateral movement of AuNPs in the channel under the AC field was analyzed by simulation using the mathematically derived equations, which were formulated from Newtonian fluid mechanics. It shows that the nanoparticles are precisely separated according to their respective mass or size difference in a short time. The experimental parameters affecting the separation and detection of AuNPs were optimized in terms of applied frequency, amplitude, flow rate, buffer concentration, pH dependency, and temperature. The final separation was performed at 1.0 V amplitude with 8.0 MHz frequency at 0.4 μL/min flow rate for the separation, and the potential of 1.0 V was applied for the amperometric detection of AuNPs in a 0.1 M PBS. Before and after the separation, AuNPs (diameter range: 3-60 nm) were confirmed by UV-visible spectroscopy and transmission electron microscopy. In this case, the separation resolution was 3 nm with an enhanced separation efficiency of up to 597,503 plates/m for the AuNPs. In addition, the amperometric current response of the detection electrode under the AC field application was also enhanced by the sensitivity 5-fold compared with the absence of the AC field.
