Efficient and Stable Inverted Perovskite Solar Cells Incorporating Secondary Amines

Large-bandgap perovskites offer a route to improve the efficiency of energy capture in photovoltaics when employed in the front cell of perovskite-silicon tandems. Implementing perovskites as the front cell requires an inverted (p-i-n) architecture; this architecture is particularly effective at harnessing high-energy photons and is compatible with ionic-dopant-free transport layers. Here, a power conversion efficiency of 21.6% is reported, the highest among inverted perovskite solar cells (PSCs). Only by introducing a secondary amine into the perovskite structure to form MA_{1- x} DMA_x PbI₃ (MA is methylamine and DMA is dimethylamine) are defect density and carrier recombination suppressed to enable record performance. It is also found that the controlled inclusion of DMA increases the hydrophobicity and stability of films in ambient operating conditions: encapsulated devices maintain over 80% of their efficiency following 800 h of operation at the maximum power point, 30 times longer than reported in the best prior inverted PSCs. The unencapsulated devices show record operational stability in ambient air among PSCs.