Percutaneous transluminal coronary angioplasty with an over-the-wire system

The original Gruentzig coaxial catheter system for percutaneous transluminal coronary angioplasty (PTCA) utilized a blunt, closed-end, inner balloon catheter with a short guide wire attached to its tip. Options for safely crossing severe stenoses with this large, nonmaneuverable catheter were limited. More recently, over-the-wire systems have been developed in which the lesion initially is crossed with a small-caliber floppy or steerable guide wire, then by the balloon catheter advanced over the wire. Technical success was achieved in 78 of our first 100 PTCAs with this system. Significant cardiac complications occurred in ten patients, seven of whom required emergency coronary bypass surgery. A recently published survey of all PTCA techniques reported a technical success rate of 62%. Our higher success rate may be attributed to certain advantages of the over-the-wire system, which are discussed in detail. A learning curve is associated with this procedure: our success rate was 65% in the first 20 cases but 81% thereafter. These results can be considered typical of those expected at hospitals now beginning PTCA programs with advanced over-the-wire technology.