Micro-aeration with hollow fiber membrane enhanced the nitrogen removal in constructed wetlands

The nitrogen removal efficiency in constructed wetlands (CWs) was largely affected by the dissolved oxygen (DO). In this study, micro-aeration with different numbers of hollow fiber membrane modules (HFMEs) was adopted to increase the oxygen availability and improve the nitrogen removal efficiency in CWs under different air temperatures and different hydraulic retention time (HRT). Compared to the plant oxygen release (ROL) of wetland plants and traditional mechanical aeration, HFME increased the oxygen availability and enhanced the nitrogen removal efficiency in CWs. The COD and NH₄⁺-N removal efficiencies increased with the increase of the HMFE. TN removal efficiency was increased by 8~16% after the application of HFME in CWs in the high-temperature stage. However, less HFME in CW-M1 realized the highest TN removal efficiency in low- and medium-temperature stages. At low temperature after 4-day HRT, the DO concentration respectively reached 6.25 mg L^-1 and 3.25 mg L^-1 in the upper zone and the bottom of CW-M1. The TN removal efficiencies in the upper zone of CW-M1 (60.69%) and the bottom of CW-M1 (64.98%) were all significantly higher than those in the upper zone of CK (35.98%) and the bottom of CK (39.9%). In addition, the microbial biomass and community analyses revealed that CW-M1 showed the most nitrifying bacteria and the best metabolic activity of bacteria. HEMF in CW-M1 also increased the nitrifying capacity from 0.12 to 0.46 mg kg^-1 h^-1. The application of HFME in CWs accelerated the nitrification process by enhancing nitrifying bacteria and less HFME realized the highest TN removal efficiency through nitrification-denitrification processes. Graphical abstract The application of hollow fiber membrane modules in CWs enhanced the pollutants (TN and COD) removal efficiency in the process of biological nitrification-denitrification and increased the number of nitrifying bacteria.