Related Experiment Video
Updated: Jan 5, 2026

Two-Dimensional Visualization and Quantification of Labile, Inorganic Plant Nutrients and Contaminants in Soil
Published on: September 1, 2020
Assessing heavy metal concentrations in earth-cumulic-orthic-anthrosols soils using Vis-NIR spectroscopy transform
Jinbao Liu1, Jichang Han2, Jiancang Xie3
1Institute of Water Resources and Hydro-electric Engineering, Xi'an University of Technology, Xi'an, 710048, China; Shaanxi Provincial Land Engineering Construction Group Co., Ltd, Xi'an, Shaanxi, 710075, China; Key Laboratory of Degraded and Unused Land Consolidation Engineering, The Ministry of Natural Resources, Xi'an, Shaanxi, 710075, China.
Abstract:
Soil visible and near infrared (Vis-NIR) has become an applicable and interesting technique to predict soil properties because it is a fast, cost-effective, and non-destruction technique. This study presents an application of diffuse reflectance spectroscopy (DRS) and chemometric techniques for evaluating concentrations of heavy metals in earth-cumulic-orthic-anthrosols soils. 44 soil samples of 0-30 cm were collected from three representative agriculture areas (Fufeng, Yangling, and Wugong transects with 16, 10, and 18 samples, respectively) and analyzed for Cr, Mn, Ni, Cu, Zn, As, Cd, Hg, and Pb by Vis-NIR spectroscopy (350-2500 nm). Average levels of Cr, Mn, Ni, Cu, Zn, As, Cd, Hg, and Pb were 17.95, 274, 12.77, 7.29, 15.81, 7.51, 0.40, 12.58, and 21.05 mg kg-1, respectively. Twenty-four preprocessing methods were extracted sensitive bands. Partial least squares regression (PLSR) used to obtain effective bands and predict soil heavy metals concentrations. The accuracy of the predictive models were assessed in terms of coefficient of determination (R2), the root mean squared error (RMSE), standard error (SE) and the ratio of performance to deviation (RPD). The results revealed that excellent predictions for Hg(Rv2 = 0.99, RPD = 8.59, RMSEP = 0.12, SEP = 0.13), Cr (Rv2 = 0.97, RPD = 5.96, RMSEP = 0.10, SEP = 0.10), Ni (Rv2 = 0.93, RPD = 3.74, RMSEP = 0.13, SEP = 0.13), Pb (Rv2 = 0.97, RPD = 5.57, RMSEP = 0.10, SEP = 0.01), and Cu (Rv2 = 0.92, RPD = 3.38, RMSEP = 0.08, SEP = 0.08). Models for As (Rv2 = 0.87, RPD = 2.58), Mn (Rv2 = 0.80, RPD = 2.09), and Cd (RPD = 2.77) had Rv2 < 0.9 and RPD<3.0, not excellent predictions. For the element of Zn, although Rv2 = 0.91, RPD = 3.13, the offset had too much deviation, and it cannot be considered an excellent model. Therefore, a combination of spectroscopic and chemometric techniques can be applied as a practical, rapid, low-cost and quantitative approach for evaluating soil physical and chemical properties in Shaanxi, China.
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...

