Determination of Drilling Rate Index Based on Rock Strength Using Regression Analysis

Drillability is influenced by many factors, including machine parameters and rock properties. The main machine parameters for drilling include rotational speed, thrust force, torque and flush pressure. The specific rock characteristics that affect penetration rate comprise uniaxial compressive strength (UCS), tensile strength, Young's modulus, hardness and brittleness. In this study, drilling rate index (DRI) is attempted to predict based on UCS and Brazilian tensile strength (BTS) of rocks. Simple and multiple regression analyses have been carried out to determine the best measure of the relation between DRI and two geomechanical properties. The DRI value is strongly related to the uniaxial compressive strength and indirect tensile strength. However, when the uniaxial compressive strength and tensile strength of rock are jointly considered, the correlation coefficient increases. The relationship between the geomechanical properties (UCS, BTS) and the DRI were determined using multiple regression analysis. Strong relationships were obtained from these analyses for the rock strength (UCS) above and below 100 MPa with the correlation coefficients 0.81 and 0.88 respectively.The results of the regression analyses show that for more precise prediction of DRI, rocks should be classified according to their strength.