Barrier Lyapunov Function-Based Adaptive Fault-Tolerant Control for a Class of Strict-Feedback Stochastic Nonlinear
Abstract:
This article investigates the adaptive fuzzy fault-tolerant control problem for a class of strict-feedback stochastic nonlinear systems with quantized input signal. A hysteretic quantizer is utilized to avoid chattering caused by quantized input signals. The fuzzy-logic systems are utilized to approximate the unknown nonlinear functions and also to construct the fuzzy state observer, which is used to estimate the immeasurable state vector. The actuator faults considered in this article are loss of effectiveness and lock-in-place faults. By using the Lyapunov stability theory, the closed-loop stochastic nonlinear system is guaranteed to be stable in probability, and all the signals of the closed-loop system are bounded in probability in the presence of quantized input and actuator faults. Finally, a simulation example is given to verify the validity of the proposed control strategy.
More Related Videos
08:35Interactive and Visualized Online Experimentation System for Engineering Education and Research
Published on: November 24, 2021
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Control System Problem
When forming a closed-loop system, issues can arise if the poles cross into the unstable region, leading to potential...
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Load-frequency control
