An approach to counter sediment toxicity by immobilization of heavy metals using waste fish scale derived biosorbent

The utilization of fish scale-derived biosorbent for immobilization of cadmium and lead in polluted sediment was thoroughly investigated in this study. Fish scale (FS) biomass was chemically and physically treated. The FS biomass treated with acid (0.1 M HCl), alkali (0.1 M NaOH) and hydrothermally, showed minimum removal capacity. While, FS treated hydrothermally along with acid showed the maximum removal efficiency of metal ions. We used different dosages (0%, 2.5%, 5%, 10%, 15%, and 20%) of FS biosorbent in the sediment. Isotherm modelling showed that this biosorbent can hold 89.30 and 92.65 mg/g of Cd and Pb on its surface. This indicated that prepared FS biosorbent has enough potential to adsorb Cd and Pb ions on its surface from the sediment. Compared to the control, sediment treated with 20% FS showed the highest immobilization capacities for Pb (92.9%), and Cd (87.9%). The values of partition coefficient (K_d) increased by 83% for Pb and 78% for Cd, which specified that availability of free ions of Pb and Cd in the aquatic system was successfully decreased. The sediment treated with 20% FS biosorbent showed 70-80% immobilization of Cd and Pb from mobile and exchangeable fractions that ultimately decreased the bioavailability of metal ions to the biota. Inclusively, compared to control, sediment served with 20% FS biosorbent showed higher level of Pb and Cd ions in residual fraction near by 80%. The prepared FS biosorbent had shown its potential in immobilizing the Cd and Pb ions from sediment as a cheap and ecologically feasible method for amendment.