Related Experiment Video
Updated: Jan 5, 2026

Measurement of Extracellular Ion Fluxes Using the Ion-selective Self-referencing Microelectrode Technique
Published on: May 3, 2015
Prevalence of Clinically Significant Differences in Sodium Measurements Due to Abnormal Protein Concentrations Using
Waddah Katrangi1, Nikola A Baumann1, Ryan C Nett1
1Mayo Clinic, Department of Laboratory Medicine and Pathology, Rochester, MN.
Background:
Indirect ion-selective electrode (ISE) is the primary method used to measure sodium in automated clinical laboratories and is susceptible to the electrolyte exclusion effect. Pseudohyponatremia due to hyperproteinemia can affect patient management. The aims of this study were to (a) establish the relationship between serum total protein (TP) concentration and the magnitude of the electrolyte exclusion effect on indirect ISE-measured sodium values (b) estimate the frequency at which TP concentrations outside the reference interval may impact indirect-ISE measured sodium values, and (c) determine whether clinical decision support (middleware) rules in the laboratory would be effective for detecting cases of pseudohyponatremia.
Methods:
Residual waste serum specimens from physician-ordered TP testing were collected (n = 112). Sodium concentration was measured using indirect ISE (Cobas 8000, Roche Diagnostics) and direct ISE (ABL 825, Radiometer) methods. The difference in sodium concentration (Δ[Na+]) was calculated as follows: ([Na+]indirect-ISE - [Na+]direct-ISE). Retrospective TP results reported from July 31, 2013, to September 24, 2014, were stratified by ordering location and sodium and TP co-ordering rates were quantified.
Results:
Δ[Na+] was inversely proportional to TP concentration (y = -1.29x + 8.6, R = -0.883). The average difference (SD, range) was -6.1(3.4, -16-0) mmol/L when TP >7.9 g/dL (>79g/L), with 69% of samples demonstrating differences ≥4.0 mmol/L. A majority of intensive care unit patients (81%) were hypoproteinemic (<6.3 g/dL, <63g/L). Only 10.9% of sodium test orders include an order for TP on the same collection.
Conclusions:
Indirect sodium measurement is impacted when TP concentrations are increased. TP concentration outside the reference interval is prevalent and sodium is usually not ordered with TP. Health systems need to be aware of the limitations of their indirect-ISE method for sodium measurement.
More Related Videos
Related Concept Videos
EDTA: Indirect and Alkalimetric Titration
Potentiometry: Membrane Electrodes
Potentiometry: Types of Electrodes
The Standard Hydrogen Electrode (SHE) is a widely used reference electrode that maintains zero potential across all temperatures. However, its need for a continuous hydrogen gas supply renders it impractical for everyday use.
An alternative to SHE is the Saturated Calomel Electrode (SCE). This electrode features an...
Electrodes: Overview
There are two main types of electrodes in electrochemical cells. The first type, known as the working or indicator electrode, has a potential that is sensitive to the analyte's concentration and reacts to changes in...
Inductively Coupled Plasma-Mass Spectrometry (ICP-MS): Interferences
Nephrotic Syndrome II : Assessment and Medical Management

