Accelerated screening of arsenic and selenium fractions and bioavailability in fly ash by microwave assistance

Huge amounts of fly ash (FA) can be annually produced in power plants. Fly ash always contains high levels of arsenic (As) and selenium (Se) due to the preconcentration of these two elements during coal combustion process. It would be much concerned to screen their fractions and potential environmental behaviors in fly ash for beneficial use and treatment. Fast and practical methods for this purpose are urgently needed. Two fast and effective microwave-assisted sequential extraction schemes (MASE) were developed for fast screening As and Se fractions in fly ash for the first time. The extraction parameters including microwave irradiation time, temperature and power energy were optimized by comparing the results from MASE and the conventional scheme (Wenzel method). The results indicate that the extraction efficiency of As and Se in various fractions can be significantly accelerated by microwave irradiation. The whole procedure operation time can be significantly reduced from 24.5 h to 44 min by microwave assistance compared with the conventional shaking schemes. The recoveries of As and Se in the various extracted fractions were all above 80% with relative standard deviations (RSDs) below 8%. The developed methods were further confirmed by the validation of the certified reference material GBW08401 and fly ash samples from six power plants. The developed MASE methods are practical and effective for fast screening arsenic and selenium fractions in fly ash samples.