Separation and preconcentration of arsenite and other heavy metal ions using graphene oxide laminated with protein...

The graphene oxide surface was laminated with bovine serum albumin (BSA) followed by the directional flow through a membrane to prepare a free-standing PLGO (protein laminated GO) composite. BSA immobilization increased the interlayer spacing of GO and led to the formation of capillaries. The column packed with PLGO adsorbent permeated water faster as much as ca. 5 fold as compared to only GO packed column. The PLGO composite was used to develop a solid phase extraction method for the selective preconcentration of As(III) in the presence of As(V), prior to their determination. As(III) binding to sulfhydryl groups of BSA in PLGO plays a key role in the speciation. The coexisting heavy metal ions did not hinder the recovery of trace As(III). The method was advantageously employed for the preconcentration of As(III), Pb(II), Cd(II), Zn(II), Cu(II) and Ni(II) from water and food samples. A 3 mL of 1 M hydrochloric acid would be adequate for the complete desorption (recovery > 99%) of the adsorbed metal ions. The preconcentration limit achieved for As(III), Pb(II), Cd(II), Zn(II), Cu(II) and Ni(II) were 1.7, 2.0, 2.0, 2.0, 1.8 and 2.0 μg L^-1 respectively, with an optimized sample flow rate of 10 mL min^-1.