Development of Freeze-Drying Cycles for Pharmaceutical Products Using a Micro Freeze-Dryer

This article aims to investigate how a small-scale freeze-dryer can be used for process design. The system encompasses a temperature controlled metallic ring that surrounds a small batch of vials, in contact with the external vials through removable thermal conductors. The temperature of the ring can be modified to keep a constant difference with the temperature of one or more vials of the batch. In this article, an extensive validation of the system is given, considering 10% w/w sucrose and 5% w/w mannitol solutions, processed in different types of vials (6 R and 20 R) and in different operating conditions. The micro freeze-dryer was also shown to be able to provide accurate estimates of the overall heat transfer coefficient from the shelf to the product in the vials (K_v) and of the resistance of the dried cake to vapor flux (R_p): both values appeared to be very close to those obtained for the same case studies in a pilot-scale unit. Finally, the use of the micro freeze-dryer to control product temperature and drying time values to simulate a pilot-scale unit was addressed, thus demonstrating the adequacy of this system for process scaleup.