Related Experiment Video
Updated: Jan 4, 2026
Utilizing a 3D Printed Laparoscopic Nissen Fundoplication Model to Shorten a Resident's Learning Curve
Published on: August 15, 2025
Mechanical and functional validation of a perfused, robot-assisted partial nephrectomy simulation platform using a
Rachel Melnyk1, Bahie Ezzat2, Elizabeth Belfast1
1Department of Urology, Simulation Innovation Laboratory, Univeristy of Rochester Medical Center, 601 Elmwood Ave, Rochester, NY, 14642, USA.
Introduction And Objectives:
There is a scarcity of high-fidelity, life-like, standardized and anatomically correct polymer-based kidney models for robot-assisted partial nephrectomy (RAPN) simulation training. The purpose of this technical report is to present mechanical and functional testing data as evidence for utilizing a perfused hydrogel kidney model created utilizing 3D printed injection casts for RAPN simulation and training.
Methods:
Anatomically correct, tumor-laden kidney models were created from 3D-printed casts designed from a patient's CT scan and injected with poly-vinyl alcohol (PVA). A variety of testing methods quantified Young's modulus in addition to comparing the functional effects of bleeding and suturing among fresh porcine kidneys and various formulations of PVA kidneys.
Results:
7% PVA at three freeze-thaw cycles (7%-3FT) was found to be the formula that best replicates the mechanical properties of fresh porcine kidney tissue, where mean(± SD) values of Young's modulus of porcine tissue vs 7%-3FT samples were calculated to be 85.97(± 35) kPa vs 80.97(± 9.05) kPa, 15.7(± 1.6) kPa vs 74.56(± 10) kPa and 87.46(± 2.97) kPa vs 83.4(± 0.7) kPa for unconfined compression, indentation and elastography testing, respectively. No significant difference was seen in mean suture tension during renorrhaphy necessary to achieve observable hemostasis and capsular violation during a simulated perfusion at 120 mmHg.
Conclusions:
This is the first study to utilize extensive material testing analyses to determine the mechanical and functional properties of a perfused, inanimate simulation platform for RAPN, fabricated using a combination of image segmentation, 3D printing and PVA casting.
