Ambient data analytic on indoor environment monitoring for office buildings in hot and humid climates
Afiqah Ngah Nasaruddin1,2, Boon Tuan Tee1,2, Mohd Tahir Musthafah1,2
1Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia.
Abstract:
The rapid development of open source developmental boards incorporating microcontrollers on printed circuit boards has offered many alternatives in creating feasible, low cost indoor environment monitoring and controlling platforms. Data are collected and stored in predetermined locations throughout a series of communication activities between a network of active sensors and their processing units. However, the issue of data precision and accuracy are of real concern for generating baseline information. Therefore, with that in mind, the purpose of this paper is to accentuate an insightful trend of retrieving indoor environment data (temperature and relative humidity) for an office building in a hot and humid climate condition. The indoor parameters were monitored using a combination of a single board microcontroller with an active sensor with well calibrated thermal microclimate devices. Accordingly, it was found that proactive adjustment can be conducted in order to minimize waste.
Related Concept Videos
01:14Temperature Measurement Sites
Oral: When assessing oral temperature, the thermometer tip should be placed under the tongue in the posterior sublingual pocket. It offers accurate readings and can be...
01:19Assessing Body Temperature - Temporal Artery
Step 1: Perform hand hygiene and don a fresh pair of gloves to prevent cross-infection and ensure patient safety.
Step 2: Explain the procedure to the patient to establish trust. Clear communication establishes trust with the patient, ensures they understand what to expect, promotes cooperation, and enhances comfort during the procedure.
Step 3: Assess the patient's...
01:14Assessing Body Temperature - Axilla
Step 1: Perform hand hygiene and put on clean gloves to maintain infection control and prevent cross-contamination.
Step 2: Prepare the patient by explaining the procedure to ensure understanding and cooperation. Ensure privacy, expose the axilla, and inform the patient that minimal movement is crucial for an accurate reading.
Step 3: Adjust the patient’s clothing to expose only the axilla. It minimizes...
01:14Assessing Body Temperature - Oral
Step 1:
Start by practicing proper hand hygiene to prevent the spread of microorganisms.
Step 2:
Take the thermometer out of the charging unit, switch it on, and wait for the ready sign.
Step 3:
Gently slide the probe cover until a click is heard. This simple action prevents cross-contamination and ensures the correct placement of the probe cover.
Step 4:
Instruct the patient to open their mouth and place...
01:23Measurement of Air Content in Concrete
The pressure method,...
02:44Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance, q, and its...