Application of non-uniform film thickness concept in predicting deviated gas wells liquid loading

Liquid loading causes undesirable occurrences such as premature death of wells, as well as significant reduction in production. However, most available models consider vertical wells and only a few focus on deviated gas wells. In order to reduce the impact of liquid loading on gas production, gas well load-up should be diagnosed at its early stage so as to proffer adequate solution. Unfortunately, most gas wells will experience liquid loading at some stage or point in their production life. Therefore, it is of utmost importance to predict liquid loading at the early life of such wells in order to develop apt liquid management strategies as corrective measures. Liquid film flow reversal concept has been identified as one of the major concepts responsible for the occurrence of liquid loading in deviated gas wells. This study develops an improvement on Chen's liquid loading model. The model specifically introduces the concept of non-uniform film thickness around the pipe wall, as against previous works which considered uniform film thickness. A modified friction factor is also introduced to account for large film thicknesses around the pipe wall. Results from the model were compared with those of previous models, and data from published literature was used to validate the new model. The new model gave accurate predictions for 11 of 12 unloaded wells while for the loaded wells, the estimated data gave accuracies for 29 out of 30 loaded wells. This then implies that the new model is accurate for predicting liquid loading in deviated gas wells. •Predictions from the new model show a good improvement over existing models.•The uniform film assumption made in Chen liquid loading model was modified, and a different interfacial friction factor was applied.•The method proposed in this study introduces the concept of non-uniform film thickness around the pipe wall as against previous works which considered uniform film thickness.