The Influence of Spraying Strategy on the Dynamic Response of Polyurea-Coated Metal Plates to Localized Air Blast...

Polyurea has attracted considerable attention owing to its potential applications in protective fields to improve the resistant performance of structures subjected to damage loads resulting from intentional or accidental explosions. However, different spraying strategies of polyurea may lead to significant differences in overall resistance performance of polyurea-coated structures, and the underlying mechanisms have not been clear until now. This study aims to elucidate the influence of spraying strategy, i.e., spraying area, spraying thickness, and spraying interface condition, on the dynamic response of polyurea-coated steel plates under localized air blast loading. Three types of plates manufactured using different spraying strategies were adopted to evaluate their blast-resistant performance. The spraying strategies used were (i) whole-area spraying, (ii) partial-area spraying, and (iii) in-contact backing of polyurea on the rear surfaces of steel plates. In addition, the influence of spraying thickness of polyurea for whole-area sprayed plates was evaluated. The energy absorbing mechanisms of polyurea backing layers were highlighted. The energy absorption of plates was quantitatively analyzed. The results show that the air blast resistances of whole-area sprayed and in-contact backed plates are both superior to, whereas that of partial-area sprayed plates is inferior to, bare steel counterparts. A suitable spraying thickness of polyurea can significantly reduce the damage of the front steel layer, whereas excessive spraying thickness decreases the overall air blast resistance of plates. The polyurea backing layer exhibits favorable performance in absorbing energy under a whole-area spraying condition. This study provides useful guidance for the design of polyurea-coated metal plates in engineering applications.