Effective removal of polymer quaternary ammonium salt by biodegradation and a subsequent Fenton oxidation process

In this paper, a process combining biodegradation and Fenton oxidation was proposed for the removal of polydiallyldimethylammonium chloride-acrylic-acrylamide-hydroxyethyl acrylate (PDM) in aqueous phase. Biodegradation of PDM was investigated in activated sludge systems, and the effects of the solution pH, mixed liquid suspended solids (MLSS), salinity, co-substrate, and initial substrate concentration, were studied. The biodegradation process was well-described with the Monod model and the values of the kinetics parameters v_max, k_s were 0.05 h^-1 and 333 mg/L. The optimal biodegradation conditions in the experimental range were determined to be: pH = 7.0, 0%-0.01% (w/v) NaCl, 4000 mg/L of MLSS, and 500 mg/L of glucose as co-substrate. FT-IR analysis indicated that PDM molecules biodegradation partly. The microbial community structures and dehydrogenase activity analysis revealed that PDM showed some toxicity to microorganisms in activated sludge. The effects of several parameters, including the pH and chemical doses, were investigated for removing PDM in Fenton oxidation process. The optimal Fenton oxidation process conditions in the experimental range were pH = 2.0, Fe²⁺ concentration of 40 mg/L, and H₂O₂ dosage of 23 mL/L. PDM was treated by biodegradation and subsequent Fenton oxidation under the optimal operating conditions. The removal efficiency was 44.5% after the biodegradation process and further increased to 85.5% after Fenton oxidation. The combined process was revealed to be a promising solution for achieving effective and economical removal of PDM.