Water-fat Dixon cardiac magnetic resonance fingerprinting

Cardiac magnetic resonance fingerprinting (cMRF) has been recently introduced to simultaneously provide T₁ , T₂ , and M₀ maps. Here, we develop a 3-point Dixon-cMRF approach to enable simultaneous water specific T₁ , T₂ , and M₀ mapping of the heart and fat fraction (FF) estimation in a single breath-hold scan.

Dixon-cMRF is achieved by combining cMRF with several innovations that were previously introduced for other applications, including a 3-echo GRE acquisition with golden angle radial readout and a high-dimensional low-rank tensor constrained reconstruction to recover the highly undersampled time series images for each echo. Water-fat separation of the Dixon-cMRF time series is performed to allow for water- and fat-specific T₁ , T₂ , and M₀ estimation, whereas FF estimation is extracted from the M₀ maps. Dixon-cMRF was evaluated in a standardized T₁ -T₂ phantom, in a water-fat phantom, and in healthy subjects in comparison to current clinical standards: MOLLI, SASHA, T₂ -GRASE, and 6-point Dixon proton density FF (PDFF) mapping.

Dixon-cMRF water T₁ and T₂ maps showed good agreement with reference T₁ and T₂ mapping techniques (R² > 0.99 and maximum normalized RMSE ~5%) in a standardized phantom. Good agreement was also observed between Dixon-cMRF FF and reference PDFF (R² > 0.99) and between Dixon-cMRF water T₁ and T₂ and water selective T₁ and T₂ maps (R² > 0.99) in a water-fat phantom. In vivo Dixon-cMRF water T₁ values were in good agreement with MOLLI and water T₂ values were slightly underestimated when compared to T₂ -GRASE. Average myocardium septal T₁ values were 1129 ± 38 ms, 1026 ± 28 ms, and 1045 ± 32 ms for SASHA, MOLLI, and the proposed water Dixon-cMRF. Average T₂ values were 51.7 ± 2.2 ms and 42.8 ± 2.6 ms for T₂ -GRASE and water Dixon-cMRF, respectively. Dixon-cMRF FF maps showed good agreement with in vivo PDFF measurements (R² > 0.98) and average FF in the septum was measured at 1.3%.

The proposed Dixon-cMRF allows to simultaneously quantify myocardial water T₁ , water T₂ , and FF in a single breath-hold scan, enabling multi-parametric T₁ , T₂ , and fat characterization. Moreover, reduced T₁ and T₂ quantification bias caused by water-fat partial volume was demonstrated in phantom experiments.