Related Experiment Video
Updated: Jan 3, 2026

Characterizing Dissipative Elastic Metamaterials Produced by Additive Manufacturing
Published on: June 28, 2024
Effects of structural damping on acoustic scattering by flexible plates
M M Nilton1, A S de Montesquieu2, A V G Cavalieri1
1Divisão de Engenharia Aeronáutica, Instituto Tecnológico de Aeronáutica, São José dos Campos, Sao Paulo 12228-900, Brazil.
Abstract:
We investigate the effects of structural damping on the interaction of a turbulent eddy with flexible plates with respect to the efficiency of aerodynamic noise generation. Potential benefits are studied using a model based on a point-reacting compliant semi-infinite plate on a spring-damper foundation. This scattering problem is solved using the Wiener-Hopf technique. We compare results for semi-infinite compliant plates with finite ones. In both cases, plate vibration lead to reductions of sound radiation, especially at resonance; damping tends to reduce such acoustic benefits. We also present a formulation that considers the effect of structural damping on the acoustic properties of finite elastic plates. Numerical results are obtained by applying a boundary element method to solve the Helmholtz equation subject to the boundary conditions imposed by the plate vibration. Under specific conditions, such as high fluid loading factor and low bending-wave Mach number, the acoustic power scattered by an edge tends to be smaller than that which propagates over the plate as bending waves. Results show that structural damping attenuates these waves and may modify the far-field acoustic pressure, mostly by reducing the scattered sound at structural resonances. All models show that large damping coefficients lead to locally over-damped responses. There is thus an ideal range of structural damping to reduce both plate vibration and acoustic scattering.
More Related Videos
11:44Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
10:52Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System
Published on: August 7, 2018
Related Concept Videos
Types of Damping
Magnetic Damping
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the...
Damped Oscillations
Although friction and other non-conservative...
Concept of Resonance and its Characteristics
Forced Oscillations
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...