Chitosan nanocomposite films based on halloysite nanotubes modification for potential biomedical applications

Chitosan is attracting increasing attention for biomedical applications because of its biocompatibility. In the present study, raw halloysite nanotubes (RHNTs) were functionalised with (3-aminopropyl) triethoxysilane (APTS) and then a sequence of novel chitosan biofilms were prepared by adding amino-modified halloysite nanotubes (HNTs-NH₂) as a reinforcing material and ethylene glycol diglycidyl ether (EGDE) as a cross-linking agent. The reaction between the APTS and the RHNTs was demonstrated through characterisation of the HNTs-NH₂. Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction (XRD) results confirmed the interaction of HNTs-NH₂ with chitosan and EGDE. Scanning electron microscopy (SEM) showed a transformation of the surface morphology of the chitosan films. Measurement of the mechanical and thermal properties showed that the nanocomposite films exhibited substantial improvements in tensile strength, elongation at break and thermal stability compared with those of the pure chitosan films. However, the swelling rate of the nanocomposite films decreased upon incorporation of the HNTs-NH₂ and EGDE. In addition, the water vapour transmission rate (WVTR) of the nanocomposite films was also improved. Given the aforementioned results, chitosan nanocomposites are promising biomedical materials.