Finite Element Simulation Study of Ultrasonic Vibration-Assisted Tensile High-Volume Fraction SiCp/Al Composite

Silicon carbide particle-reinforced aluminum matrix composite (SiCp/Al) has been widely used in the military and aerospace industry due to its special performance; however, there remain many problems in the processing. The present paper introduces an ultrasonic vibration tensile apparatus and a composite tensile specimen and performs Abaqus finite element simulation on high-volume SiCp/Al. The results show that the stress-strain curve increases linearly during conventional tensile strength; the intermittent vibration tensile strength is similar to the full course vibration tensile strength: The magnitude of the stress reduction increases as the amplitude of the ultrasound increases and the vibration frequency increases. The tensile rate is inversely proportional to the magnitude of the stress reduction, and in the ultrasonic parameters, the amplitude has the greatest influence on the magnitude of the stress reduction, followed by the tensile rate; additionally, the frequency has the least influence on the magnitude of the stress reduction. The experimental results show that the simulation results are consistent with the experimental results.