Performance of Cutting Tool with Cross-Chevron Surface Texture Filled with Green Synthesized Aluminium Oxide...

The newer methodology to improve the performance of cutting tool is by the constructive method of micro-texturing and green synthesized nanoparticles into the texture gaps for self-lubrication. Cross-chevron textures were made on the rake face of the cemented carbide tool using Neodymium Doped Yttrium Aluminium Garne (Nd-YAG) laser texturing machine. The environmentally friendly, non-hazardous and rapid method of producing nanoparticles was followed to produce Al₂O₃ nanoparticles. Various techniques used for characterizing the synthesized Al₂O₃ nanoparticles are Potential of Hydrogen (pH), Fourier Transform Infra-Red Spectroscopy Analysis (FTIR), Dynamic light scattering (DLS) and X-Ray Diffraction (XRD). The XRD shows the presence of required functional groups and the size of nanoparticles in the range of 500-550 nm. This article discusses the effect of textures, with and without nanoparticles filled on the texture gaps of the cemented carbide tool on the main cutting force, thrust force and co-efficient of friction while machining austenitic stainless steel 304. The combined effect of surface texturing and lubrication of Al₂O₃ nanoparticles enhanced the performance of the cutting tool compared with the conventional and textured tool.