An efficient and environmentally friendly process for the reduction of SO2 by using waste phosphate mine tailings as
Yunxiang Nie1, Jinfeng Dai1, Yidong Hou1
1Faculty of Chemical Engineering, Kunming University of Science and Technology, Kunming, 650500, PR China; Yunnan Provincial Key Laboratory of Energy Saving in Phosphorus Chemical Engineering and New Phosphorus Materials, Kunming, 650500, PR China; The Higher Educational Key Laboratory for Phosphorus Chemical Engineering of Yunnan Province, Kunming, 650500, PR China.
Abstract:
The emission of SO2 and the disposal of waste phosphate mine tailings are generally regarded as two major environmental issues in phosphorus chemical activities. In this paper, an environmentally friendly and efficient route for removing SO2 from phosphorus chemical processes by using waste phosphate mine tailings as adsorbent was proposed. It was indicated that the desulfurization performance of the waste phosphate mine tailings was better than that of its raw ore. The characterization analysis illustrated that higher content of CaMg(CO3)2 was shown on the waste phosphate mine tailings, which played a dominant role in determining the better desulfurization activity. In contrast, the accumulation of PO43- and H+ ions resulted from the dissolution of Ca5(PO4)3F on the raw ore caused negative effect on SO2 removal. In the typical desulfurization system, the produced sulfuric acid from desulfurization process was used to decompose phosphate mine tailings, and these spent tailings can be subsequently applied as raw materials for the production of phosphorus products. As a result, the present approach can achieve the dual goal of reducing the cost of desulfurization process and recycling the waste tailings, which is of great environmental and economic significance.
