Identification of unknowns in industrial wastewater using offline 2D chromatography and non-target screening
Kirsten Purschke1, Christian Zoell2, Juri Leonhardt3
1Environmental Analysis, Currenta GmbH & Co. OHG, CHEMPARK BLG Q18, D-51368 Leverkusen, Germany; Instrumental Analytical Chemistry (IAC) and Centre for Water and Environmental Research (ZWU), University of Duisburg-Essen, Universitaetsstrasse 5, D-45141 Essen, Germany.
Abstract:
Industrial wastewater is characterised by a complex composition of trace organic compounds (TrOC) in a difficult matrix. The identification of unknown pollutants is of high interest. On the one hand to ensure protection of the environment by elucidating contaminations and on the other hand to protect the biological treatment step in the wastewater treatment plant (WWTP). Due to the high variability of the matrix, the identification of compounds of interest is very time consuming and often unsuccessful. To overcome this limitation, a prioritisation method was developed to identify so called 'known unknowns', i.e. compounds frequently detected but not identified, as prioritised compounds in industrial wastewater. The method based on an offline two-dimensional (offline 2D) liquid chromatography (LC) approach with ultra violet (UV) detection in the first and high-resolution mass spectrometry (HRMS) in the second dimension. As a proof of concept, an identification process of one 'known unknown' is described. The compound was identified as a dichlorodinitrophenol isomer by retention time in two dimensions, UV spectrum, exact mass, mass fragmentation and 1H- NMR. As prioritisation method, the offline 2D LC in combination with non-target analysis provides a powerful workflow to determine tentative structures of unknown organic compounds in industrial wastewater.
Related Concept Videos
High-Performance Liquid Chromatography: Types of Detectors
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
High-Performance Liquid Chromatography: Introduction
In HPLC, two phases play a critical role in the separation process:
Chromatography: Introduction
The phase in which the compounds linger or on which the compounds adsorb is called the stationary phase, whereas the mobile phase is the solvent that carries the solutes to be analyzed. In traditional column chromatography, the mixture flows through the stationary phase, and the compounds partition between the stationary and mobile phases...


