Platelet deposition estimation: A novel method for emulating the pump thrombosis potential of blood pumps

Pump thrombosis potential exists in most blood pumps and limits their clinical use. To improve the pump thrombosis performance of blood pumps, a method for emulating the platelet deposition on the flow passage component surfaces inside blood pumps was presented and tested. The method emulates the blood platelet deposition, employing laser-induced fluorescence tracing technology. The blood pump was rotated in a mock circulation loop with deionized water filled with fluorescent particles. The component surfaces were then explored via laser. The fluorescent particles were induced by laser and imaged in a charge-coupled device (CCD) camera to show the distribution of fluorescent particles gathering on the blood pump component surfaces. The activated platelet deposition was emulated by fluorescent particle gathering. The experiment showed obvious particle gathering on the interface surfaces and cross-sectional surface (perpendicular to the flow). This platelet deposition estimation (PDE) method can be easily incorporated in the in vitro testing phase to analyze and decrease a pump's thrombosis potential before animal experimentation, thereby reducing the cost of blood pump development. This methodology of emulating blood platelet deposition indicates its potential for improving flow passage component structure and reducing device thrombosis of blood pumps.