[Start-up of a Three-stage PN/A Granular Sludge Reactor for Treating Wastewater with High Concentrations of Ammonia]

In order to apply partial nitritation-ANAMMOX (PN/A) technology to treat wastewater with high concentrations of ammonia, autotrophic nitrogen-removing granular sludge was crushed and inoculated into a three-stage continuous flow reactor. The nitrogen loading rate (NLR), dissolved oxygen (DO) concentration, and free ammonia (FA) levels in each compartment of the reactor were controlled over a 106-day period. Results showed that the nitritation process occurred with the inoculated granules during the initial phase. A limited aeration strategy was employed in the reactor at relatively high NLRs. Given the effective suppression of nitrite-oxidizing bacteria and the prevention of ANAMMOX bacteria from high DO conditions, the compact structure and nitrogen-removal activity of the granules could be improved. When the ammonia-nitrogen concentration was increased in the influent to 350 mg·L^-1, the adverse impacts of high FA concentrations on the functional microbe activity in the first compartment should be eliminated. This occurs by reducing the influent pH and alkalinity dosage. This occurs by reducing the influent pH and degree of alkalinity. As a result, a total nitrogen removal rate of 7.2 kg·(m³·d)^-1 was achieved in the reactor, which is 50 to 100 times higher than that of conventional activated sludge systems. The consistent improvement in the nitrogen-removal activity of the granules was demonstrated by batch testing at different aeration intensities. This showed that activity was greatest in the first compartment, which showed the highest granular maturity. In addition, a clear linear correlation (R²>0.97) was observed between the amount of extracellular polymeric substance and the specific nitrogen removal rate. This indicated that the dense granules played a positive role in enhancing the performance of the reactor.