OPTIMIZATION OF THE RADIOACTIVE AEROSOL SAMPLING AND MEASURING PROCEDURE WITH RESPECT TO RADON CONCENTRATION IN THE...

High-volume aerosol samplers combined with laboratory analysis using high-resolution gamma ray spectrometry allow determining artificial radionuclides in the atmosphere at sub μBq/m3 levels. A major drawback of this procedure is a significant delay of the analysis result after any potential radioactive contamination deposition on the aerosol filter. Within the scope of the HAMRAD project, an autonomous device was developed in order to increase the sampling and measuring frequency. This approach yields higher detection limits (minimum detectable activity concentration [MDAC]) due to the deposited activity of radon decay products on the filter. In order to quantify the radon effect, a simple mathematical model was developed to predict MDAC for the particular radionuclide of interest for the given background conditions. It was found that MDAC can vary by a factor of ~2 for typical 'radon' conditions (~10 Bq/m3) at SÚRO Prague and by a factor up to 5 for high radon concentration (100 Bq/m3).