High temperature Vernier probe utilizing photonic crystal fiber-based Fabry-Perot interferometers

This study proposes a highly sensitive and stable optical fiber probe based on Vernier effect for high temperature measurement (up to 1000 °C), utilizing photonic crystal fiber (PCF)-based Fabry-Perot interferometers (FPIs). The cascaded FPIs are fabricated by fusion splicing a section of polarization maintaining PCF to a lead-in single-mode fiber, and then a section of temperature-insensitive hollow core PCF is spliced between the PMPCF and a multi-mode fiber. The shift of the spectral envelope is monitored to measure the temperature variation. Experimental results show that the sensitivities of three fabricated probes are as high as 173.43 pm/ °C, 230.53 pm/ °C and 535.16 pm/ °C when operating from room temperature to 1000 °C, which are consistent with theoretical results. The sensitivities are magnified about 13, 19 and 45 times compared with the single FPI. The linearity of the temperature response is as high as 99.73%. The proposed probe has great application prospects due to compactness, high sensitivity and low cost.