Treatment of As-rich mine effluents and produced residues stability: Current knowledge and research priorities for...

Refractory ores, in which gold is often embedded within As-bearing and acid-generating sulfide minerals, are becoming the main gold source worldwide. These ores require an oxidizing pre-treatment, prior to cyanidation, to efficiently breakdown the sulfides and enhance gold liberation. As a result, large volumes of As-rich effluents (> 500 mg/L) are produced through the pre-oxidation of refractory gold ores and/or the exposure of As-bearing tailings upon exposure to air and water. Limited information is available on performant treatment of these effluents, especially of pre-oxidation effluents characterized by a complex chemistry, extremely acidic or alkaline pH and high concentrations of arsenic. The treatment of As-rich effluents is mainly based on precipitation (using Al or Fe salts and/or Ca-based compounds) and (electro)-chemical or biological oxidation processes. A performant treatment process must maximize As removal from contaminated mine water and allow for the production of residues that are geochemically stable over the long term. An extensive literature review showed that Fe(III)-As(V) precipitates, especially bioscorodite and (nano)scorodite, appear to be the most appropriate forms to immobilize As due to their low solubility and high stability, especially when encapsulated within an inert material such as hydroxyl gels. Research is still required to assess the long-term stability of these As-bearing residues under mine-site conditions for the sustainable exploitation of refractory gold deposits.