Charcoal production from waste pequi seeds for heat and power generation

Many specialized technologies are available to convert waste biomass into secondary products that have a higher value and are more convenient to process than the original feedstock. This study evaluated the potential of waste pequi seeds to produce high-quality charcoal for subsequent gasification into low-tar producer gas for heat engine applications. We focused on the characterization of pequi seeds, the derived charcoal, and the collected bio-oil from slow pyrolysis conversion of the feedstock. Thermodynamic equilibrium calculations were conducted to assess gasification performance of the parent biomass and its charcoal. We also investigated the thermal degradation kinetics of pequi seeds through non-isothermal thermogravimetric analysis. Finally, a two-step energy-extraction analysis was performed for the carbonization of the parent biomass and further utilization of its charcoal in an integrated gasification gas-engine cycle. Slow pyrolysis of pequi seeds (2 °C min^-1, 430 °C) produced up to 40% of high-grade charcoal with 60% fixed carbon, 43% of bio-oil, and 16% of light gases. The overall energy extraction efficiency was estimated as 61%, based on the higher heating value of wet pequi seeds. The investigation confirmed that waste pequi seeds could be considered a promising renewable energy source for combined heat and power generation for the Brazilian agro-food industry.