Revealing Polymorphic Phase Transformations in Polymer-Based Hot Melt Extrusion Processes

The inadvertent occurrence of polymorphic phase transformations in active pharmaceutical ingredients (APIs) during hot melt extrusion (HME) processes has been claimed to limit the application of this technique. Hence, the control of polymorphism would need to be addressed if there is any prospect of HME to be successfully implemented as an alternative solid dosage formulation strategy in integrated, continuous end-to-end pharmaceutical manufacturing settings. This work demonstrates that flufenamic acid (FFA), one of the most polymorphic APIs known, thus far, can be processed using temperature-simulated HME with polyethylene glycol (PEG) as polymeric carrier. At temperatures above the transition point of FFA forms III and I (42 °C), the induction time of the polymorphic phase transformation is longer than the average reported residence time in conventional HME processes (5 min). Moreover, it was demonstrated that thorough understanding of the thermodynamic and kinetic design space for the PEG-FFA system leads to polymorphic control in the produced crystalline solid dispersions. Ultimately, this investigation helps to gain fundamental understanding of the processing needs of crystalline solid dispersions, which will lead to the broader application of HME as a continuous manufacturing strategy for drug products containing APIs prone to polymorphism, representing about 80% of all APIs.