Application of algae for heavy metal adsorption: A 20-year meta-analysis

The use of algae to adsorb heavy metals is an efficient and environmentally friendly treatment for contaminated water and has attracted widespread research attention. In this study, a meta-analysis of the heavy metal adsorption capacity of algae from five different phyla and the factors influencing these capacities was conducted. Phaeophyta was found to have a high heavy metal adsorption capacity, whereas Bacillariophyta had a relatively low adsorption capacity; Chlorophyta, Rhodophyta, and Cyanophyta had moderate adsorption capacities. Non-living algae were more effective in practical applications than living algae were. Algal biomass had a relatively high adsorption efficiency of 1-10 g/L, which did not increase significantly when algal concentration increased. The algal adsorption efficiency for initial heavy metal concentrations of 10-100 mg/L was higher than for concentrations of greater than 100 mg/L. The results further show that algal adsorption of heavy metals reached a maximum capacity of 80-90% within 20 min. Heavy metal adsorption by algae was not temperature-dependent, and it was more effective in moderately to weakly acidic environments (pH = 4-7.5). Considering these aspects for practical applications, algae from some phyla can effectively be used for heavy metal biosorption in contaminated water.