Removal of Cu(II) from aqueous solution using a composite made from cocoa cortex and sodium alginate

The aim of this work was to prepare a composite material based on cocoa cortex and sodium alginate and test it to remove Cu(II) ions in aqueous solution in batch conditions. The composite was characterized using elemental analysis, scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA/DTG), and point of zero charge. The highest amount of adsorbed Cu(II) for the composite was 19.54 mg/g, i.e., 95.32% of an initial concentration of 100 mg/L. Under the same conditions, the cocoa cortex untreated exhibited extremely low adsorption, while when it was treated with hot soda, it adsorbed 13.67 mg/g. Adsorption by the composite reached the equilibrium after 220 min. Kinetic data analysis suggested that the process was governed by adsorption (pseudo-second-order model) and diffusion through macropores and/or mesopores (intra-particle model). The adsorption isotherm that best described the system was Langmuir's. The maximum adsorption capacity of Cu(II) was 76.92 mg/g. The values of the thermodynamic parameters indicated that the process was spontaneous, with ΔG° values between (- 7.886 and - 9.458 kJ/mol) and endothermic, with ΔH° = 7.728 kJ/mol. Graphical abstract.