Enhanced interfacial polarization in poly(vinylidene fluoride-chlorotrifluoroethylene) nanocomposite with parallel...

The miniaturization of electronics provides an opportunity for the polymer film capacitor due to its lightweight and flexibility. In order to improve energy density and charge-discharge efficiency of the film capacitor, the development of a polymer nanocomposite is one of the effective strategies, in which the distribution of the fillers plays a key role in the enhancement of the electrical energy capability. In this work, the few-layer boron nitride nanosheets (BNNSs) was exfoliated with assistance of the fluoro hyperbranched polyethylene-graft-poly(trifluoroethyl methacrylate) (HBPE-g-PTFEMA) copolymer as stabilizer, which was adsorbed on the surface of the nanosheets via a CH-π non-covalent interaction. The morphological results confirm the lateral size of ∼0.4 μm for resultant nanosheets with the intact crystal structure. The loading of 0.5 vol% BNNSs was embedded into poly(vinylidene fluoride-chlorotrifluoroethylene) (P(VDF-CTFE)) matrix by solution casting method, and then the nanocomposite film was uniaxial stretched to achieve the orientation of nanosheets in polymer host. The dielectric constant of stretching nanocomposite with ratio of 4 at 50 mm min^-1 reaches 51.1 at 100 Hz with low loss as 0.016, while the energy density of 7.0 J cm^-3 at 250 MV m^-1 with charge-discharge efficiency of 56% is obtained in current nanocomposite film, which is attributed to the interfacial polarization as well as parallel nanosheets blocking the growth of electrical treeing branches. This strategy of the aligned nanosheets/polymer nanocomposite establishes a simple route to construct heterogeneity in polymer films with enhanced electrical energy capability for flexible capacitors.