Estimating exposure to hydrogen sulfide from animal husbandry operations using satellite ammonia as a proxy:...

Husbandry trace gases that have climate change implications such as carbon dioxide (CO₂), methane (CH₄) and ammonia (NH₃) can be quantified through remote sensing; however, many husbandry gases with health implications such as hydrogen sulfide (H₂S), cannot. This pilot study demonstrates an approach to derive H₂S concentrations by coupling in situ and remote sensing data. Using AMOG (AutoMObile trace Gas) Surveyor, a mobile air quality and meteorology laboratory, we measured in situ concentrations of CH₄, CO₂, NH₃, H₂S, and wind at a southern California university research dairy. Emissions were 0.13, 1.93, 0.022 and 0.0064 Gg yr^-1; emission factors (E_F) were 422, 6333, 74, and 21 kg cow^-1 yr^-1, respectively, for the 306 head herd. Contributing to these strong E_F were spillway emissions from a grate between the main cowshed and the waste lagoon identified in airborne remote sensing data acquired by the hyperspectral thermal infrared imager, Mako. NH₃ emissions from the Chino Dairy Complex, also in southern California, were calculated from Infrared Atmospheric Sounding Interferometer (IASI) satellite data for 2008-2017 using average morning winds, yielding a flushing time of 2.7 h, and 8.9 Gg yr^-1. The ratio of E_F(H₂S) to E_F(NH₃) for the research dairy from AMOG data were applied to IASI NH₃ emissions to derive H₂S exposure concentration maps for the Chino area, which ranged to 10-30 ppb H₂S for many populated areas. Combining remote sensing with in situ concentrations of multiple emitted gases can allow derivation of emissions at the sub-facility, facility, and larger scales, providing spatial and temporal coverage that can translate into exposure estimates for use in epidemiology studies and regulation development. Furthermore, with high fidelity information at the sub-facility level we can identify best practices and opportunities to sustainably and holistically reduce husbandry emissions.