Improving UV Resistance of Aramid Fibers by Simultaneously Synthesizing TiO₂ on Their Surfaces and in the Interfaces...

Aramid fibers with low density and high strength, modulus, and thermal resistance are widely used in applications such as bulletproof vests and cables. However, owing to their chemical structure, they are sensitive to ultraviolet light, which degrades the fibers' useful mechanical properties. In this study, titanium dioxide (TiO₂) nanoparticles were synthesized both on the aramid III fiber surface and in the interfacial space between the fibrils/microfibrils in supercritical carbon dioxide (scCO₂) to improve the UV resistance of aramid fibers. The effects of scCO₂ treatment pressure on the TiO₂ structure, morphology, surface composition, thermal stability, photostability, and mechanical properties were investigated using Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, ultraviolet-visible spectroscopy, and single-fiber test. The results show that amorphous TiO₂ formed on the fiber surface and the interface between fibrils/microfibrils, and decreased the photodegradation rate of the aramid III fiber. Moreover, this modification can also improve the tensile strength via treatment at low temperature and without the use of a solvent. The simple synthesis process in scCO₂, which is scalable, is used for mild modifications with a green solvent, providing a promising technique for synthesizing metal dioxide on polymers.