Related Experiment Video
Updated: Dec 31, 2025

Thin Film Composite Silicon Elastomers for Cell Culture and Skin Applications: Manufacturing and Characterization
Published on: July 3, 2018
Hyperelastic Properties of Platinum Cured Silicones and its Applications in Active Compression
Gayani K Nandasiri1, Anton Ianakiev2, Tilak Dias1
1Advanced Textiles Research Group, School of Art and Design, Nottingham Trent University, Bonington Building, Dryden Street, Nottingham NG1 4 GG, UK.
Abstract:
This paper presents the fundamental research of design, development, and evaluation of an active compression system consisting of silicone based inflatable mini-bladders, which could be used in applying radial pressure for the treatment of venous disease. The use of mini-bladders will nullify the effect of radius of curvature and provide a higher resolution to the pressure distribution. They are designed with two elastomeric layers and inflation is limited only to one side. The mini-bladders apply a radial force onto the treated surface when inflated, and the pressure inside mini-bladders could be measured using the concept of back pressure, which provides the flexibility to inflate mini-bladders to a predefined pressure. The 3-D deformation profile of the mini-bladders was analysed using finite element method (FEM) and FEM simulations were validated with experimental data, which showed good agreement within pressure region required for the treatment of venous disease. Finally, the pressure transmission characteristics of mini-bladders were evaluated on a biofidellic lower leg surrogate and the results have shown that the mini-bladders could apply a uniform pressure irrespective of the location on the leg with a 60%-70% of inlet pressure successfully transmitted onto the leg surface, while 40%-50% was available after the fat layers.
Related Concept Videos
Members Made of Elastoplastic Material
As the bending moment...
Plastic Behavior
Dynamic Modulus of Elasticity of Concrete
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by a...
Elasticity in Concrete
Residual Stresses in Bending
Strain and Elastic Modulus

