Related Experiment Video
Updated: Dec 30, 2025

WheelCon: A Wheel Control-Based Gaming Platform for Studying Human Sensorimotor Control
Published on: August 15, 2020
Fuzzy-Model-Based Output Feedback Reliable Control for Network-Based Semi-Markov Jump Nonlinear Systems Subject to
Abstract:
This article investigates the reliable output feedback control problem for networked nonlinear semi-Markov jump systems, in which a control strategy with redundant channels is established to reduce the adverse effect caused by packet dropouts. The actuator faults are fully considered in the setup. On the basis of stochastic analysis theory and fuzzy-model-based method, some criteria are established to guarantee the σ -error mean-square stability for the considered systems. As a consequence, the reliable output feedback controller design method is proposed, which can be utilized to deal with the actuator failures problem effectively. Finally, two illustrative examples are employed to explain the availability of the presented design approach, where the single-link robot arm system model is contained.
Related Concept Videos
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Parameters Affecting Nonlinear Elimination: Zero-Order Input, First-Order Absorption and Two-Compartment Model
When a drug is administered through a constant intravenous infusion and eliminated via nonlinear pharmacokinetics, it follows zero-order input. For example, oral drugs undergo first-order absorption upon administration and are eliminated through nonlinear pharmacokinetics.
In the case of subcutaneously administered drugs,...
BIBO stability of continuous and discrete -time systems
To determine the BIBO stability, the convolution integral is utilized when a bounded continuous-time input is applied to a Linear Time-Invariant (LTI) system....
Effects of feedback
Feedback significantly modifies the gain of a control system. The gain of a system without feedback is altered by a factor of one plus GH, where G represents...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Multi-input and Multi-variable systems
In the absence of...
