Related Experiment Video
Updated: Dec 30, 2025

Implantation of Combined Telemetric ECG and Blood Pressure Transmitters to Determine Spontaneous Baroreflex Sensitivity in Conscious Mice
Published on: February 14, 2021
Continuous Tracking of Changes in Systolic Blood Pressure using BCG and ECG
Abstract:
Blood pressure (BP) is an important physiological marker of human health. It is commonly measured by a cuff-based monitor via either auscultatory or oscillometric methods. Recently, significant research has been conducted to mathematically estimate BP from pulse transit time (PTT) to enable cuffless and continuous BP measurement. In this research, a new time reference, RJ interval, which is the time delay between electrocardiogram (ECG) R peak and ballistocardiogram (BCG) J peak was evaluated to determine if it can be used as a surrogate of PTT in cuffless BP estimation. Biomedical signals from ten healthy subjects were acquired by BCG, ECG and PPG sensors and the continuous reference BP data were collected by a cuff-based Finometer PRO BP monitor. An exponential model was employed to estimate systolic blood pressure (SBP) using RJ interval and PTT. RJ intervals extracted from ECG and BCG were shown to be useful in evaluating trends of SBP and can be the surrogate of PTT in cuffless SBP estimation.
Related Concept Videos
Special considerations while measuring blood pressure
Monitoring Both Arms:
Monitoring BP in both arms during the initial assessment is advisable, as the systolic value may differ by five to ten mm Hg between arms. For subsequent BP assessments, use the arm with the higher reading.
Measurement of Blood Pressure
Pulse rhythm
Conversely, an irregular pulse pattern is termed dysrhythmia, stemming from disruptions in cardiac...
Equipments Used To Measure Blood Pressure
This invasive approach involves cannulating a peripheral artery. During each cardiac contraction, pressure generates mechanical motion within the catheter, transmitted through rigid, fluid-filled tubing to a transducer. This transducer converts mechanical motion into electrical signals displayed as waveforms on a monitor. An automatic flushing system prevents blood backflow. Due to the potential risk of unexpected arterial blood loss, this method is primarily used in intensive...
Assessment of blood pressure in brachial artery(two-step method)
Errors occurring during blood pressure monitoring
Several factors...

