Related Experiment Video
Updated: Dec 30, 2025

Comparison of Scale in a Photosynthetic Reactor System for Algal Remediation of Wastewater
Published on: March 6, 2017
What's the variation in anammox reactor performance after single and joint temperature based shocks?
Hui Chen1, Yuan-Yuan Mao2, Ren-Cun Jin3
1Department of Environmental Engineering, Taizhou University, Taizhou 318000, China.
Abstract:
A laboratory-scale up-flow anaerobic sludge blanket reactor was used to investigate the effects of temperature-based (single and combined with loading) shocks on the performance of anaerobic ammonium oxidation (anammox) reactor. The reactor was tolerant to 15 °C and 25 °C shocks; however, temperature shock of 55 °C led to severe accumulation of effluent NO2--N (>100 mg L-1), which induced substrate inhibition. Although the shock experiments achieved a maximum effluent NO2--N concentration of 205.4 mg L-1 after a hydraulic retention time-substrate concentration shock at 25 °C, the inhibition was still reversible. During the experiments, the content of extracellular polymeric substances (EPS) increased significantly after each shock to protect the anammox bacteria, and the value decreased correspondingly at the end of the recovery phase. The specific anammox activity showed the opposite tendency compared with that of the EPS. The performance of anammox reactor under a series of short-term temperature shocks was investigated, and the results can provide new ideas for future research.
Related Concept Videos
Effect of Temperature Change on Reaction Rate
Temperature Dependence on Reaction Rate
Atoms, molecules, or ions must collide before they can react with each other. Atoms must be close together to form chemical bonds. This premise is the basis for a theory that explains many observations regarding chemical kinetics, including factors affecting reaction rates.
The collision theory is based on the postulates that (i) the reaction rate is proportional to the rate of reactant collisions, (ii) the reacting species collide in an orientation allowing contact between...
Factors Influencing Microbial Growth: Temperature
Physical Methods for Controlling Microbial Growth: Temperature
Hyperthermophilic Bacteria

