Performance of small-domain monolithic silica columns in nano-liquid chromatography and comparison with commercial...

We report on a direct comparison of the separation performance in capillary nano-LC between commercial packed bed columns and the small-domain silica monoliths in applications. Octadecylsilylated monolithic silica capillary columns with a 50 and 100 µm inner diameter (i.d.) were prepared with a procedure providing domain sizes in the sub-2 µm range. The fabricated monolith columns could provide plate heights (H) of 4.0‒4.2 µm for hexylbenzene (retention factor (k) = 3.6) at an optimal linear velocity range under an isocratic condition, while showing a column permeability (K_v0 = 1.6‒1.8 × 10^-14 m²) comparable to that of a column packed with 3‒3.5 µm particles. When the peak capacity (n_p) for a cytochrome C digest was compared for variable gradient times (t_G = 15, 30, 60, and 120 min) and constant gradient steepness (b'), the present monolith columns could show a 30‒40% higher n_p-value than the packed capillary column with 2 µm particles (e.g. n_p = 180 versus n_p = 259 at t_G = 30 min). The produced monolith columns showed a high chromatographic repeatability for both isocratic and gradient elution (e.g. relative standard deviation (n = 3, RSD (%)) = 0.5% for H, 2,6% for k, and 5.6% for K_v0 in the isocratic mode using the 100 µm i.d.-columns). The present results show that the domain sizes which can now be achieved for capillary silica monoliths are sufficiently small to result in separation efficiencies that can successfully compete with the commercial packed bed columns available for use in nano-LC applications.