Using diffuse reflectance spectroscopy (DRS) technique for studying biofilm formation on LDPE and PET surfaces:...

Biofilm formation on plastic debris needs to be further investigated, because microorganisms attached to plastics are transferred in all three dimensions to new regions by ocean currents. The current study aims to investigate biofilm formation on plastic strips in aquatic ecosystems using a simple physicochemical method commonly used to characterize solid surfaces, namely, the diffuse reflectance UV-Vis spectroscopy (DRS) method. Using virgin polymers that have not being exposed to the environment as a reference, DRS peaks can be attributed to the microorganisms attached to the polymer surface with time. The polymers tested were low-density polyethylene (LDPE) and polyethylene terephthalate (PET). For LDPE strips for all sampling times in the field, the development of the peaks among 10 similar samples was rather uniform in terms of peak wavelength with time. For PET strips during the early sampling time, the development of the peaks among 10 similar samples was rather uniform in terms of peak wavelength but varied in terms of intensity. This last observation phased out with longer exposure times that the peaks had similar distribution in terms of peak wavelength and intensity. Similar experiments were run for longer exposure times both in an oligotrophic laboratory bioreactor and in the marine environment. In both cases, the biofilm on PET samples seems to reach a steady state faster than LDPE with similar peaks found on both samples DRS proved to be a robust and useful tool to study the formation of biofilm on plastic samples without any pretreatment and without sample destruction. Graphical abstract.