Related Experiment Video
Updated: Dec 29, 2025
Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
Hierarchical ZnO@Hybrid Carbon Core-Shell Nanowire Array on a Graphene Fiber Microelectrode for Ultrasensitive
Yuze Wang1, Ruoyu Xu2, Liwei Chen1
1Key Laboratory of Photoelectronic/Electrophotonic Conversion Materials, Key Laboratory of Cluster Science, Ministry of Education of China, School of Chemistry and Chemical Engineering , Beijing Institute of Technology , Beijing 100081 , P. R. China.
Abstract:
A hierarchical architecture composed of nitrogen (N)-rich carbon@graphitic carbon-coated ZnO nanowire arrays on a graphene fiber (ZnO@C/GF) was fabricated by direct growth of a ZnO@zeolitic imidazolate framework-8 (ZIF-8) core-shell nanowire array on a GF followed by annealing and used as a microelectrode for detection of 2,4,6-trinitrotoluene (TNT). In such a design, ZnO accumulated TNT through a strong nitroxide-zinc interaction and ZIF-8 served as the precursor of the N-rich carbon@graphitic carbon layer that seamlessly connected ZnO with the GF to improve the poor conductivity of ZnO, thus enhancing the sensitivity of the ZnO@C/GF microelectrode. The constructed hierarchical hybrid fiber microsensor exhibited a wide linear response to TNT in a concentration range of 0.1-32.2 μM with a low detection limit of 3.3 nM. This ZnO@C/GF microelectrode was further successfully applied to the detection of TNT in lake and tap water, indicating its promise as a portable sensor for the electrochemical detection of explosive compounds.
