Related Experiment Video
Updated: Dec 28, 2025

Determination of the Settling Rate of Clay/Cyanobacterial Floccules
Published on: June 11, 2018
A study on the differences in the flocculation of dredged slurries and the influencing mechanisms
Silin Wu1, Yuyang Zhu2, Wei Zhu3
1Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering, College of Civil and Transportation Engineering, Hohai University, No. 1 Xikang Rd, Gulou, Nanjing 210098, China.
Abstract:
In the water treatment process of natural water bodies, a large amount of dredged slurry with high water content is generated and required for treatment. The coagulation-flocculation method can improve the efficiency of separation, and a suitable scheme is of great significance. It is unclear whether there is a significant difference in flocculation and separation of dredged slurries from different sources and which constituents dominate this process. Facing these problems, the tests were conducted for dredged sediments from 10 different sources, including rivers, lake, and ocean. Under the same flocculation conditions, the difference in the increment of particle size d10, the specific resistance of filtration, and the suspended solids (SS) of the supernatant after sedimentation are 0-4.6 times, 0-2.4 orders of magnitude, and 0-4 orders of magnitude, respectively. It was found that the main constituents in the dredged slurries, such as clay minerals, fulvic acid and humic acid, impact on flocculation and separation effects by affecting the zeta potential of the particles. However, there is no single constituent in the dredged slurry which dominates the flocculation and separation effect. When these constituents are incorporated, the zeta potential exhibited in the slurry determines the difference in flocculation and separation effects.
Related Concept Videos
Coagulation
Colloids
Colloidal precipitates
Factors Affecting Dissolution: Particle Size and Effective Surface Area
Typical Model Studies
Theories of Dissolution: The Danckwerts' Model and Interfacial Barrier Model

